Are you a car mechanic? If you are, then you definitely have a car jack in your kit. It is one of the most important equipment for both avid and amateur car mechanics.
Dealing with cars definitely requires having some trust in the equipment. But you will need to have complete trust in the car jack you are using as it will be supporting the heavy vehicle above you.
We have listed some of the best car jacks made in the USA that are worthy of your trust. Our buying guide, along with the FAQs section, will definitely help you choose the best for your mechanic personality.
So what’s the wait? Check out our list of top picks below.
3 Best Car Jack Made in USA Review
Tired of changing your garage equipment every few months? We have listed the top-rated car jacks in the market below just for you. Read on to find the equipment you can use for a long time with full confidence.
1. Hein-Werner HW93642 Blue Hydraulic Service Jack – 2 Ton Capacity
Our first pick is this beautifully designed car jack from Hein-Werner. The equipment comes with a lift arm made of cast iron and weighs only 99 pounds and doesn’t take up much space either. Working with this car jack is easy and simple. Further, it comes with a pump base that has enough strength to lift up any heavy vehicle.
Load control can be troublesome, and precision is required in this case for most vehicles. You don’t have to worry about load control with this particular equipment as it comes with a U-joint that ensures excellent precision.
When it comes to hydraulic pumps, you would want it sealed. The sealed pumps are protected from being contaminated by the particles in air. A sealed hydraulic pump is also guaranteed to be durable, and it makes the car jack more enduring as well.
You need to look for strength and stability in car jacks. The more strength a jack has, the better it will perform with heavier vehicles. This guy from Hein-Werner is equipped to handle many vehicles as long as they weigh less than 2 tons.
The wide frame and flagged side plates of this jack provide stability and strength to the equipment. Without these features, car jacks don’t usually perform well.
Using this equipment is simple; it comes with casters in the rear end and wheels in the front end. You will be able to maneuver the vehicle easily and safely using this tool. If you are looking for something durable and easy to use, we definitely recommend this product for you.
- Made in the USA
- Cast iron lift arm and pump base for strength
- U-joint for precise load control
- Sealed hydraulic pump
- Flagged side plates and wide frame for stability
Pros
- Durable and long-lasting
- The hydraulic pump is sealed
- It comes with a wide frame and flagged side plates
- Includes a U-joint
- The lift arm is made of cast iron
Cons
- Some users complained of receiving damaged products
- Lifting cars requires pumping several times
2. US JACK D-51125 12 Ton Bottle Jack Made In USA
Whether you are working with a farm vehicle, a section of a building, or a tall and heavy car, this particular jack will be able to pick all of those up. This is one of the best heavy-duty car jacks you will find in the market.
When you are working with a tall car or a heavy vehicle, it is normal to be scared of the heavyweight falling on you. But don’t worry; this jack is the most reliable equipment out there. The 12-ton bottle jack will not disappoint or fail you in any way.
As the name of the product suggests, its lifting capacity is 12 tons. This is very impressive for any car jack in the market. The product is designed to last a long time; it’s very simple to use as well.
There is a ductile-iron plate type base attached to this tool; this part of the jack gives it more stability. When it comes to car jacks, you would want better stability as more stability means that your vehicle will have more support.
The jack is compact and easy to store; it won’t take much space in your garage. And if you are a professional car mechanic, you will be able to carry it around in the back of your truck or car.
A carry handle attached securely to the body makes this lightweight car jack product easy to carry around. It might seem bulky given that it’s capable of carrying so much weight. But it is light enough to be portable. We definitely recommend it for heavy vehicles.
- 100% Made in USA
- Extended Height 15 1/4 inch With screw 19 1/2 inch
- Model number: CECOMINOD084778
- Package weight of the Product: 20.85 pounds
Pros
- Well-built
- Long-lasting
- Ductile-iron base
- The capacity is 12-tons
- Includes carry handle
Cons
- Not for standard vehicles
- Completely manual
3. Barker 32454 VIP 3500 Power Jack Black 3500 LB Capacity
Have you ever lived in a trailer? Or do you live in a trailer now? Then you definitely know how tiresome and time-consuming jacking up this home/vehicle is.
The last one in our short, thorough list is this trailer jack. You can definitely go for this jack if you are living in a trailer park.
Most car mechanics don’t often work with trailers, but a good mechanic will definitely have the necessary equipment to work on any vehicle. These car jacks come with 3500-pound capacity so it can’t be used for the other cars. But when it comes to trailers, it’s fantastic to work with.
This jack is one of the fastest ones in the market. You don’t really require much manual labor whenever you are working with this hardware because it can be turned on/off with a switch. Yes! It’s a remote control car jack.
You would be happy to know that waiting is not an option with this jack. You can just flip the switch, and it will start or stop lifting your trailer. Working with this particular jack is not only fun but also efficient. The equipment is sealed, so it’s waterproof and can be used in any weather. Its footpad is wide enough so you can even use it in the rain or on soft surfaces.
Whole-body of this equipment is made of rust-resistant materials, so no worries about rusting. The steel tubing of this car jack is coated with zinc and is rust-resistant as well.
Along with Deluxe Ball Screw and a night light, this is one of the most convenient equipment you will find in the market. The equipment also includes a “Crank-Thru” head for emergencies. With this, you will be able to lower down the trailer when the car jack’s battery is low.
We definitely recommend this convenient car jack if you can work with 3500-pound capacity.
Pros
- Remote control
- Fast
- Night light
- “Crank-Thru” Head
- Waterproof
Cons
- 3500-pound capacity
- Needs power source
Things to Consider Before Buying
Most mechanics don’t need different types of car jacks in their kits. But a good mechanic should be able to work on any vehicle. We think that you, as a mechanic, should have the equipment you need.
If you are new to carjack shopping, we have just the perfect guide for you. Check out the features below that every car jack should be equipped with:
Lifting Capacity
In the review section, we have discussed 3 different carjacks with different lifting capacities. Well, you don’t need a jack with high lifting capacity; you just need one that is ideal for the vehicles you work with.
Well-Built
This is one of the most important features you need to look for in a car jack. You are using it for lifting up your vehicle. So it must be well-built and able to lift up the vehicle for longer hours.
If the car jack you are using is not well-built, then the car will definitely fall on you or the ground after some time. These incidents happen, and they are fatal. We suggest that you invest in equipment that is both durable and well-built.
User Convenience
The car jack you are working with should be simple and easy to use. Keep in mind that you are only using this hardware as a part of your work. So it shouldn’t take up much set-up time or require much maintenance.
Your jack should also have smooth lifting performance and require minimal effort for lifting the vehicle. Some people might think that power jacks are better than manual ones, but no. Both of these tools are ideal for different situations. In some cases, the manual jacks are preferred over the power jacks.
Build Materials
If your jack is well-built but not made of durable materials, then it won’t perform well. Always go for a rust-resistant and steel made car jack. You can opt for other materials like aluminum as well, but we highly recommend steel.
The material of the equipment plays a major role in durability. If you want a durable and reliable product, you go for durable and reliable material. You don’t need to invest a lot of premium quality car jacks, just get one that is durable.
Frequently Asked Questions
Here we have some of the most commonly asked queries regarding car jacks:
Q: Are power jacks better than the manual ones?
Ans: Not always. Power jacks are easier to work within some cases, but in the other cases, manual car jacks are preferred. You can opt for a power jack or a manual jack depending on the work you are doing and the vehicles you are working on.
Q: Can I use a car jack for changing my vehicle’s tires anywhere?
Ans: No. You can never use a jack for changing tires on grass or dirt. Concrete and solid surfaces are recommended for using these tools.
Q: Is it necessary that the lifting capacity and my vehicle’s weight is the same?
Ans: Yes, it is actually a very crucial aspect. Your vehicle’s weight must be within the lifting capacity of your car jack.
Q: How often should I clean my car jack?
Ans: Depending on how often you are using it. If you are not a mechanic, you will be using your car jack only once or twice a year.
Q: How long should a car jack last?
Ans: Car jacks should last a long time. There are instances of these equipment being used for 20 years.
Final Words
Consider the factors we have mentioned while purchasing your own car jack. We have recommended three-car jack made in the USA, and you can use each of them for various purposes. Choose the one that fits your work environment best. Good luck!
Also read-
Leave a Reply